Stainless Steel Reactor
Product Introduction
The double-layer stainless steel reaction kettle is designed with double-layer stainless steel. The inner layer can be stirred and reacted by putting the reaction solvent, and the interlayer can be connected to different cold and heat sources (refrigerated liquid, hot water or hot oil) for cyclic heating or cooling reaction. Under the set constant temperature, in a closed stainless steel reactor, the stirring reaction can be carried out under normal pressure or negative pressure according to the requirements of use, and the reaction solution can be refluxed and distilled. It is a modern fine chemical factory, biopharmaceutical and Ideal pilot and production equipment for the synthesis of new materials.
Technical Featureas and Description
1. In addition, the components are sealed with tetrafluoroethylene, which can maintain a good vacuum degree among similar products in the market, and maintain high-precision sealing under working conditions. There is also a chip collection groove.
2. In the form of mechanical seal, the PTFE connection port1. In addition, the components are sealed with tetrafluoroethylene, which can maintain a good vacuum degree among similar products in the market, and maintain high-precision sealing under working conditions. There is also a chip collection groove.
2. In the form of mechanical seal, the PTFE connection port is used to maintain a high-accuracy seal under working conditions.
3, PT100 sensor probe, high temperature measurement accuracy, small error, improve work efficiency.
4. PTFE discharge valve, movable interface, quick discharge.
5. After the reaction is completed, the cooling or heating solution in the interlayer of the reactor can be accumulated without accumulation of liquid.
6. The overall stainless steel column frame structure, five-port reaction kettle cover, with a full set of glass for reflux, liquid addition, temperature measurement, etc.
7. Strong torque, no noise.
8. The double PTFE stirring paddle of the reactor is suitable for stirring and mixing liquids with low to high viscosity. is used to maintain a high-accuracy seal under working conditions.
3, PT100 sensor probe, high temperature measurement accuracy, small error, improve work efficiency.
4. PTFE discharge valve, movable interface, quick discharge.
5. After the reaction is completed, the cooling or heating solution in the interlayer of the reactor can be accumulated without accumulation of liquid.
6. The overall stainless steel column frame structure, five-port reaction kettle cover, with a full set of glass for reflux, liquid addition, temperature measurement, etc.
7. Strong torque, no noise.
8. The double PTFE stirring paddle of the reactor is suitable for stirring and mixing liquids with low to high viscosity.
Specification
|
Base parameter |
Model | BSG-20L |
| Dimensions(mm) | 400*400*1850 | |
| Kettle body Volume(L) | 20 | |
| Interlayer Volume(L) | About 5 | |
| Voltage/Frequency(V/Hz) | 220/50 | |
| Reaction temp.(ºC) | -100~299 | |
| Stirring speed(Mpa) | 10-600 | |
| Vacuum(Mpa) | -0.098 | |
| Max Pressure(Mpa) | 0.6 | |
| Power(w) | 120/Anti-explosion 180 | |
|
Functional configuration |
Seal mode | PTFE |
| Kettle cover port quantity | 6 pieces(Optional) | |
| Glass material | GG-17 High borosilicate glass | |
| Measure temp hole/Distribution droplets hole | 25DN | |
| Condensation hole | 40♯ | |
| Backflow port | 40♯ | |
|
Feeding hole mm |
60∅ | |
| Distribution droplets | Constant pressure funnle | |
| Pressure gauge | 50.5 chuck /± integrated pressure gauge | |
| Condenser | Anchor | |
| Stirring | Vertical high efficiency double backflow condenser |
Products details
Structure
Application Field
