A .Technical features of a high pressure photocatalytic reactor:
1. Small floor area: it can be placed on the experimental platform or on the laboratory floor, saving a lot of valuable experimental space for domestic laboratories.
2. Online detection: stable gas online collection and detection system, vacuum environment quantitative sampling, so that the detection data is more accurate.
3. Vacuum injection: the injection system is seamlessly connected with the vacuum reaction system, which not only ensures the air tightness during the injection, but also can manually inject the sample to make the standard curve of hydrogen standard sample.
4. Easy operation: one stop service, ready to use, sampling, testing only need to move a vacuum valve, the operation is very simple, and the experiment process is simplified.
5. Strong system compatibility: the system can not only conduct photocatalytic water hydrogen production experiments, but also be compatible with photocatalytic electrolytic water hydrogen production, thermal catalytic water hydrogen production and carbon dioxide methanol production under normal pressure, which are suitable for online detection of vacuum system.
6. High detection accuracy: the photodegradation water hydrogen production system has a measurement accuracy of 1ppm, which is suitable for various experimental needs of collection and detection of very small to constant gases.
B. Precautions for operation of high pressure photocatalytic reactor:
(1) In order to avoid electric shock, the input power line of the instrument is grounded. The instrument uses a three core grounding plug, which has a grounding pin. If the plug cannot be inserted into the socket, the electrician should be asked to install the correct socket to prevent the instrument from losing its grounding protection.
(2) Attention to using power supply: before connecting the AC power supply, ensure that the voltage is consistent with the voltage required by the instrument, and ensure that the rated load of the power socket is not less than the requirements of the instrument.
(3) Use power cord note: the attached power cord is usually used for the photocatalytic reactor. If the power cord is damaged, it must be replaced without repair. The power cord of the same type and specification must be used for replacement.
Post time: Jun-03-2022