company-(6)

Products

High Pressure H2 Hydrogen Generator for Fid/Gc

Short Description:


  • Hydrogen purity: 99.999%
  • Hydrogen flow: 0-1000ml/min
  • Output pressure: 0-10Mpa
  • Volume of water loaded: 0.5-1.6L or 1-3.2L
  • Product Detail

    Product Tags

    Ⅰ. Usage overview:

    TK series high pressure hydrogen generator is a compact high pressure hydrogen generator, adopting PEM electrolysis water hydrogen production technology, directly electrolysis of ultrapure water, no need for booster pump, after multi-stage drying, to get high pressure high purity hydrogen gas. The generator is built-in parallel dual electrical system, the system operates independently to ensure the safety of equipment operation.
    Ⅱ. Main features:
    1. Electrolysis of water to produce hydrogen, on-demand production, hydrogen purity of 99.999%.
    2. Maximum 10 MPa working pressure, replacing the laboratory high-pressure hydrogen cylinder.
    3. According to the use of the need to set the upper pressure limit value, to extend the service life of the electrolytic cell
    4. Non-contact high sensitivity liquid level detection, to achieve water shortage alarm, to avoid damage to the electrolytic cell due to low water level.
    5. Built-in high sensitivity hydrogen sensor, if hydrogen leakage, the software prompts and beeps the alarm.
    Ⅲ. Flow Chart

    Ⅳ. Main technical parameters.

    Model

    TK-3300H

    TK-7300H

    TK-7500H

    TK-100K

    TK-100KPLUS

    Hydrogen purity

    99.999%

    Hydrogen flow

    0-320ml/min

    0-320ml/min

    0-500ml/min

    0-1000ml/min

    0-1000ml/min

    output pressure

    0-3Mpa

    0-7Mpa

    0-10Mpa

    Volume of water loaded

    0.5-1.6L

    1-3.2L

    Water quality requirements

    Deionised/secondary distilled water, conductivity≤0.2μS/cm

    pressure stability

    0.001Mpa

    Voltage

    220V±10%,50Hz or 110V

    Power

    160W

    280w

    550W

    Environmental requirements

    5-40℃ <80%RH

    Recommended Environment

    laboratory hoods

    Outlet parameters

    316 stainless steel tube OD1/8”

    Dimensions: (D*W*H, mm)

    420*260*440

    520*300*520




  • Previous:
  • Next:

  • Write your message here and send it to us