Double Separation Type 2000ml/H Small Spray Dryer for Milk Powder
Detail
It is suitable for the production of micro-granular powder in universities, research institutes and laboratories of food, medicine and chemical enterprises. It has a wide range of applicability to all solutions such as emulsions and suspensions. It is suitable for drying of heat-sensitive substances such as biological products, biological pesticides, enzymes. preparations, etc. Because the sprayed materials are only subjected to high temperature and instantaneous heat when sprayed into a mist, these active materials maintain their active ingredients unchanged after drying.
Specifically used in the following fields: Beverage flavors and pigments Milk and egg products Plant and vegetable extracts And tooth powder graphene and so on.
Feature
1. Refined nozzle, high efficiency.
2. Color large touch screen operation, combination of automatic control and manual control, Chinese and English panel, parameter LCD display.
3. Real-time regulation of PID constant temperature control technology, accurate temperature control, heating temperature control accuracy ± 1 ℃.
4. The spraying, drying and collecting devices are made of transparent high-quality high-temperature resistant high-borosilicate glass, and the whole process of spray drying experiment can be seen.
5. The atomization structure of the two-fluid spray is made of high-precision 316 stainless steel material. The particle size of the spray powder is normally distributed and has good fluidity.
6. The ejector is automatically dredged (through the needle) and the frequency is adjustable. When the nozzle is blocked, it will be automatically cleared to ensure the continuity of the experiment.
7. The feeding amount can be adjusted by the feeding peristaltic pump.
8. Unique protection function, the fan does not start, the heater cannot start, and the air volume of the fan is adjustable.
9. Built-in Taiwan Dolphin oil-free air compressor, the noise is less than 50db.
10. Equipped with air inlet filter to ensure sample purity.
11. The dried product has a uniform particle size, and more than 95% of the dry powder is in the same particle size.
Parameters
 |
Inlet air temperature control: 30 ºC ~ 300 ºC |
| Outlet air temperature control: 30 ºC ~ 150 ºC | |
| Evaporated water volume: 1500mL/H ~ 2000ml/h | |
| Maximum amount of feed: the maximum amount is 2000ml/h (adjustable) | |
| Small amount of feed:50mL | |
| Feeding way:Peristaltic pump regulation | |
| Average drying time: 1.0~1.5S | |
| Electric heater power: 3KW AC220V single-phase ground | |
| Fan: 0.55kW | |
| Air pressure: 1020Pa | |
| air volume: 5.6m3/min | |
| Air compressor: 0.55kW | |
| gas production 4.2m3 /h | |
| Compressed air working pressure: 2 ~ 3Bar | |
| Nozzle diameter: 1.00mm | |
| Equipment weight: 130KG | |
| Dimensions: 1300mm(height) ×650mm (length) ×800mm (width) |
