Stainless Steel High Pressure Parallel Reactor
Technical Advantages
SLP stirring method: internal strong magnetic stirring, no shaft seal leakage and its maintenance, to ensure no leakage of rotating parts, the test is safer.
SLP stirring motor: German original imported high power motor, strong and powerful, high speed and stability.SLP gas inlet valve: gas inlet needle valve, reliable quality.
SLP sampling valve: easy to take samples and analyse the reaction process at any time during the reaction.
SLP venting valve: convenient for vacuum treatment of the system and replacement of gas before the reaction, and as a venting valve after the reaction.
SLP pressure gauge: real time monitoring of the reaction pressure.
SLP temperature probe: deep inside the reactor body, real time monitoring of the reaction temperature SLP heating unit: modular heating, fast heating and precise control.
Main Features
•Accurate and error-free parallel testing of multiple reactions.
•Independent over-temperature and over-pressure alarm and intelligent pressure relief for each group of reaction zones.
•.Computer-connected control for interactive human-machine operation.
•Multi-functional and compact design that does not take up much space
•Long reaction cell life with "zero" maintenance
•Highest level of chemical protection
-Internal precise + parallel temperature control technology
•Parallel anhydrous and oxygen-free technology
•Parallel tube sealing technology
•Parallel micro-reaction technology
•Parallel anhydrous and oxygen-free reflux
•Integration of high and low temperatures at room temperature
•Good parallel temperature uniformity.
•Safety protection level A, explosion-proof valve for precise pressure relief for long term use.
•Excellent stability and uniformity of parallel speed and parallel temperature.
Parameters
| Model | GPXF-3L*100ml |
| High temperature high pressure reactor | Reaction kettle device: 2 sets (including heating and stirring system), volume: 100ml*2 sets Material: stainless steel, pressure: -0.1-20Mpa, temperature: RT-300℃, stirring: mechanical 0-1500 rpm, magnetic: 0-2000 rpm |
| Effective volume | 100ml*3 |
| Kettle body material | Stainless steel |
| Design pressure | -0.1-25Mpa, ≤20Mpa recommended |
| Design temperature | RT -300°C, ≤250°C recommended |
| Design magnetic speed | 0-2000 rpm |
| Design mechanical speed | 0-1500rpm |
| Control method | PID intelligent program control + software + computer control |
| Mixing method | Magnetically coupled stirring + high temperature 300 degrees without demagnetisation |
| Mixing power | Top drive power: 100 W*2sets, bottom magnetic drive power: 60 W*2 |
| Heating power | 800 W*2 |
| Timer settings | 0-9999min |
| Over temperature protection | Over-temperature alarm automatically stops heating |
| Overpressure protection | Intelligent overpressure relief protection, intelligent setting of overpressure relief values |
| Pressure parallel | Supports independent or simultaneous parallel pressure settings |
| Cooling methods | Rapid cooling with built-in cooling coils for low temperature circulation and support for rapid water cooling |
| Pressure discharge method | Ball valve rapid pressure discharge, normal 20Mpa pressure 2 minutes rapid pressure relief to 0Mpa. |
| Overfluid protection | Effective filtration of >50nm micro-particles in on-line reaction or sampling situations to ensure valve life |
| Overgas protection | Effective filtration in the case of in-line reactions over venting, ensuring clean and impurity-free gas |
